Summit Industrial Park
147 Summit St.BLD 3D,Suite 3
Peabody, MA 01960
Telephone: 781.944.0003
Fax: 781.944.1055
Toll Free: 800.336.8882
Email: info@ken-bar.com
 
Seed Tray Heaters
The Seed Tray Heaters offered by Ken-Bar Inc are safe, low-voltage devices that operate on 24 volts AC. A converter allows the heaters to be plugged into a standard wall outlet. The heaters are manufactured by coating a sheet of Mylar (polyester) with a resistive-conductive ink. Flat copper conductors are added to the sides of the coated surface to power the heater and another sheet of polyester is added to completely seal the unit. Seed Tray Heaters are designed to generate an exceptionally uniform, gentle heat that is ideal for germinating seeds. Seed trays can be placed directly on the surface of the heaters. Heat will be generated continuously and the heaters may be left on. Insulation may be placed under the heaters to maximize heating efficiency, but this is not necessary. Soil temperatures should be monitored with a soil thermometer. If a lower temperature is required, the seed tray can be raised slightly above the heater using thin shims.


Product Description

The Seed Tray Heater measures 9" x 24" and will generate heat at 90 degrees F. The unit is rated at 13 watts at 24 volts AC and has a plug-in converter. This convenient size will provide continuous, uniform, gentle heat under most common sizes of seed trays.


  Home
Agricultural Plastics
  • Planters Paper
  • SRM Silver
  • SRM Black
  • SRM Red
  • SRM White
  • SRM Olive
  • Floating Covers
  • Custom Covers
  • Low Tunnels
    Agritape
  • Agritape Heaters
  • Precise Heat Mats
  • Seed Tray Heaters
  • Control Units
    Home Gardener
    Greenhouse Supplies
  • High Tunnel Vent
  • Inflation Equipment
  • Eskay Lite Vinyl
  • Batten Tape
  • Convection Tubing
    Email

  • © 1998- 2004 Ken-Bar, Inc.
    Produced by Floriculture.com
    Email the Webmaster